The Neutralizer


Availability: Out of stock SKU: UP-53120-01CS Category:
Compare Compare


Safety Data Sheet – The Neutralizer

The Neutralizer is utilized as a secondary rinse following the soft wash process to neutralize corrosive bleach crystals on cleaned surfaces, plants, and equipment. The Neutralizer will remove bleach streak, which results from poor rinsing of bleach solution following cleaning. Spraying The Neutralizer on and through equipment, trailers and vehicles will neutralize bleach crystals to protect from rapid corrosion, both by neutralizing the bleach solution as well as with active corrosion inhibitors in formulation. Pumps, sprayers, hoses and fittings should be flushed, thus stopping premature repairs and replacement. Use The Neutralizer to spray sensitive shrubbery and outdoor (non-edible) plants before and after use of bleach, in order to prevent harm. Always rinse plants thoroughly with water following use. Do not leave product to dry on plants.

Pre-rinse all surfaces to be treated. Mix 2 – 4 oz. of The Neutralizer per gallon of water for low pressure spray applications on windows or to spray down equipment. Mix 2 – 4 oz. per gallon for X-Jet application.
Mix 4 – 6oz per gallon for downstream injectors. Rinse lightly.



There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Vendor Information

  • No ratings found yet!

General Inquiries

There are no inquiries yet.